manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 311

CONFIGURATION ECMP-GROUP mode

interface 

interface interface tengigabitethernet 1/1/1 interface port-

channel 100

3.

Enable monitoring for the bundle.
CONFIGURATION ECMP-GROUP mode

link-bundle-monitor enable

Modifying the ECMP Group Threshold

You can customize the threshold percentage for monitoring ECMP group bundles.

To customize the ECMP group bundle threshold and to view the changes, use the following commands.

• Modify the threshold for monitoring ECMP group bundles.

CONFIGURATION mode

link-bundle-distribution trigger-threshold {

percent

}

The range is from 1 to 90%.

The default is 

60%

.

• Display details for an ECMP group bundle.

EXEC mode

show link-bundle-distribution ecmp-group 

ecmp-group-id 

The range is from 1 to 64.

Viewing an ECMP Group

NOTE: An ecmp-group index is generated automatically for each unique ecmp-group when you 
configure multipath routes to the same network. The system can generate a maximum of 512 
unique ecmp-groups. The ecmp-group indices are generated in even numbers (0, 2, 4, 6... 1022) 
and are for information only.
You can configure ecmp-group with 

id 2

 for link bundle monitoring. This ecmp-group is different 

from the ecmp-group 

index 2

 that is created by configuring routes and is automatically generated. 

These two ecmp-groups are not related in any way.

Dell(conf-ecmp-group-5)#show config

!

ecmp-group 5

  interface tengigabitethernet 1/2/1

  interface tengigabitethernet 1/3/1

  link-bundle-monitor enable

Dell(conf-ecmp-group-5)#

Support for /128 IPv6 and /32 IPv4 Prefixes in Layer 3 Host Table and LPM 

Table

IPv6 enhancements utilize the capability on S6000 platform to program /128 IPv6 prefixes in LPM table 
and /32 IPv4 prefixes in Host table. Also host table provides ECMP support for destination prefixes in the 

Equal Cost Multi-Path (ECMP)

311

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды