manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 198

To view BGP routes matching a certain community number or a pre-defined BGP community, use the 

show ip bgp community

 command in EXEC Privilege mode.

Dell>show ip bgp community

BGP table version is 3762622, local router ID is 10.114.8.48

Status codes: s suppressed, d damped, h history, * valid, > best, i - internal

Origin codes: i - IGP, e - EGP, ? - incomplete

Network            Next Hop  Metric  LocPrf Weight Path

* i 3.0.0.0/8      195.171.0.16      100    0      209 701 80 i

*>i 4.2.49.12/30   195.171.0.16      100    0      209 i

* i 4.21.132.0/23  195.171.0.16      100    0      209 6461 16422 i

*>i 4.24.118.16/30 195.171.0.16      100    0      209 i

*>i 4.24.145.0/30  195.171.0.16      100    0      209 i

*>i 4.24.187.12/30 195.171.0.16      100    0      209 i

*>i 4.24.202.0/30  195.171.0.16      100    0      209 i

*>i 4.25.88.0/30   195.171.0.16      100    0      209 3561 3908 i

*>i 6.1.0.0/16     195.171.0.16      100    0      209 7170 1455 i

*>i 6.2.0.0/22     195.171.0.16      100    0      209 7170 1455 i

*>i 6.3.0.0/18     195.171.0.16      100    0      209 7170 1455 i

*>i 6.4.0.0/16     195.171.0.16      100    0      209 7170 1455 i

*>i 6.5.0.0/19     195.171.0.16      100    0      209 7170 1455 i

*>i 6.8.0.0/20     195.171.0.16      100    0      209 7170 1455 i

*>i 6.9.0.0/20     195.171.0.16      100    0      209 7170 1455 i

*>i 6.10.0.0/15    195.171.0.16      100    0      209 7170 1455 i

*>i 6.14.0.0/15    205.171.0.16      100    0      209 7170 1455 i

*>i 6.133.0.0/21   205.171.0.16      100    0      209 7170 1455 i

*>i 6.151.0.0/16   205.171.0.16      100    0      209 7170 1455 i

--More--

Changing MED Attributes

By default, Dell Networking OS uses the MULTI_EXIT_DISC or MED attribute when comparing EBGP 

paths from the same AS.

To change how the MED attribute is used, enter any or all of the following commands.

• Enable MED comparison in the paths from neighbors with different ASs.

CONFIG-ROUTER-BGP mode

bgp always-compare-med

By default, this comparison is not performed.

• Change the bestpath MED selection.

CONFIG-ROUTER-BGP mode

bgp bestpath med {confed | missing-as-best}

–

confed

: Chooses the bestpath MED comparison of paths learned from BGP confederations.

–

missing-as-best

: Treat a path missing an MED as the most preferred one.

To view the nondefault values, use the 

show config

 command in CONFIGURATION ROUTER BGP 

mode.

Changing the LOCAL_PREFERENCE Attribute

In Dell Networking OS, you can change the value of the LOCAL_PREFERENCE attribute.
To change the default values of this attribute for all routes received by the router, use the following 
command.

198

Border Gateway Protocol IPv4 (BGPv4)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды