Dell S6000-ON Скачать руководство пользователя страница 267

Страница: 267 / 1080

Configure ToR- and FCF-facing interfaces as auto-upstream ports.

Configure server-facing interfaces as auto-downstream ports.

Configure a port to operate in a configuration-source role.

Configure ports to operate in a manual role.

Enter INTERFACE Configuration mode.
CONFIGURATION mode

interface type

slot/port/subport

Enter LLDP Configuration mode to enable DCBx operation.
INTERFACE mode

[no] protocol lldp

Configure the DCBx version used on the interface, where:

auto

configures the port to operate using

the DCBx version received from a peer.
PROTOCOL LLDP mode

[no] DCBx version {auto | cee | cin | ieee-v2.5}

•

cee

: configures the port to use CEE (Intel 1.01).

•

cin

: configures the port to use Cisco-Intel-Nuova (DCBx 1.0).

•

ieee-v2.5

: configures the port to use IEEE 802.1Qaz (Draft 2.5).

The default is

Auto

Configure the DCBx port role the interface uses to exchange DCB information.
PROTOCOL LLDP mode

[no] DCBx port-role {config-source | auto-downstream | auto-upstream |
manual}

•

auto-upstream

: configures the port to receive a peer configuration. The configuration source is

elected from auto-upstream ports.

•

auto-downstream

: configures the port to accept the internally propagated DCB configuration

from a configuration source.

•

config-source

: configures the port to serve as the configuration source on the switch.

•

manual

: configures the port to operate only on administer-configured DCB parameters. The port

does not accept a DCB configuration received from a peer or a local configuration source.

The default is

Manual

5. On manual ports only

: Configure the PFC and ETS TLVs advertised to DCBx peers.

PROTOCOL LLDP mode

[no] advertise DCBx-tlv {ets-conf | ets-reco | pfc} [ets-conf | ets-reco |
pfc] [ets-conf | ets-reco | pfc]

•

ets-conf

: enables the advertisement of ETS Configuration TLVs.

•

ets-reco

: enables the advertisement of ETS Recommend TLVs.

•

pfc enables

: the advertisement of PFC TLVs.

The default is All PFC and ETS TLVs are advertised.

Data Center Bridging (DCB)

267

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S6000-ON

Отзывы:

Бренды по названию

Популярные бренды

Dell S6000-ON, Руководство по настройке

Результаты поиска

Содержание S6000-ON

Отзывы:

Бренды по названию

Популярные бренды