Dell S6000-ON, Руководство по настройке

Страница: 101 / 1080

tag 35
level stub-area
Dell#
To delete all instances of that route map, use the
no route-map map-name
command. To delete just
one instance, add the sequence number to the command syntax.
Dell(conf)#no route-map zakho 10
Dell(conf)#end
Dell#show route-map
route-map zakho, permit, sequence 20
Match clauses:
interface TenGigabitEthernet 1/1/1
Set clauses:
tag 35
level stub-area
Dell#
The following example shows a route map with multiple instances. The
show config
command displays
only the configuration of the current route map instance. To view all instances of a specific route map,
use the
show route-map
command.
Dell#show route-map dilling
route-map dilling, permit, sequence 10
Match clauses:
Set clauses:
route-map dilling, permit, sequence 15
Match clauses:
interface Loopback 23
Set clauses:
tag 3444
Dell#
To delete a route map, use the
no route-map map-name
command in CONFIGURATION mode.
Configure Route Map Filters
Within ROUTE-MAP mode, there are
match
and
set
commands.
•
match
commands search for a certain criterion in the routes.
•
set
commands change the characteristics of routes, either adding something or specifying a level.
When there are multiple
match
commands with the same parameter under one instance of route-map,
Dell Networking OS does a match between all of those
match
commands. If there are multiple
match
commands with different parameters, Dell Networking OS does a match ONLY if there is a match among
ALL the
match
commands. In the following example, there is a match if a route has any of the tag values
specified in the
match
commands.
Example of the
match
Command to Match Any of Several Values
The following example shows using the
match
command to match any of several values.
Dell(conf)#route-map force permit 10
Dell(config-route-map)#match tag 1000
Dell(config-route-map)#match tag 2000
Dell(config-route-map)#match tag 3000
Example of the
match
Command to Match All Specified Values
In the next example, there is a match only if a route has both of the specified characteristics. In this
example, there a match only if the route has a tag value of 1000 and a metric value of 2000.
Access Control Lists (ACLs)
101