manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 162

•

Next Hop

NOTE: There are no hard coded limits on the number of attributes that are supported in the BGP. 
Taking into account other constraints such as the Packet Size, maximum number of attributes are 
supported in BGP.

Communities

BGP communities are sets of routes with one or more common attributes. Communities are a way to 
assign common attributes to multiple routes at the same time.

NOTE: Duplicate communities are not rejected.

Best Path Selection Criteria

Paths for active routes are grouped in ascending order according to their neighboring external AS 

number (BGP best path selection is deterministic by default, which means the 

bgp non-

deterministic-med

 command is NOT applied).

The best path in each group is selected based on specific criteria. Only one “best path” is selected at a 
time. If any of the criteria results in more than one path, BGP moves on to the next option in the list. For 
example, two paths may have the same weights, but different local preferences. BGP sees that the Weight 
criteria results in two potential “best paths” and moves to local preference to reduce the options. If a 
number of best paths is determined, this selection criteria is applied to group’s best to determine the 
ultimate best path.
In non-deterministic mode (the 

bgp non-deterministic-med

 command is applied), paths are 

compared in the order in which they arrive. This method can lead to Dell Networking OS choosing 
different best paths from a set of paths, depending on the order in which they were received from the 
neighbors because MED may or may not get compared between the adjacent paths. In deterministic 
mode, Dell Networking OS compares MED between the adjacent paths within an AS group because all 
paths in the AS group are from the same AS.

NOTE: The 

bgp bestpath as-path multipath-relax

 command is disabled by default, 

preventing BGP from load-balancing a learned route across two or more eBGP peers. To enable 
load-balancing across different eBGP peers, enable the 

bgp bestpath as-path multipath-

relax

 command. A system error results if you configure the 

bgp bestpath as-path ignore 

command and the 

bgp bestpath as-path multipath-relax

 command at the same time. 

Only enable one command at a time.

The following illustration shows that the decisions BGP goes through to select the best path. The list 
following the illustration details the path selection criteria.

162

Border Gateway Protocol IPv4 (BGPv4)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды