manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 344

Slot/Port

[

/subport

]

, Range

: Slot and Port ID for the interface. Range is entered Slot/Port[

/

subport

]-

Slot/Port

[

/subport

].

3.

Assign the Primary and Secondary ports and the control VLAN for the ports on the ring.
CONFIG-FRRP mode.

interface primary 

interface slot/port

[

/subport

] secondary 

int slot/port

[

/

subport

] control-vlan 

vlan id

Interface

:

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port/

subport information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port 

information.

Slot/Port

[

/subport

]

, Range

: Slot and Port ID for the interface. Range is entered Slot/Port[

/

subport

]-

Slot/Port

[

/subport

].

VLAN ID

: The VLAN identification of the control VLAN.

4.

Configure the Master node.
CONFIG-FRRP mode.

mode 

master

5.

Identify the Member VLANs for this FRRP group.
CONFIG-FRRP mode.

member-vlan 

vlan-id

 {

range

}

VLAN-ID, Range

: VLAN IDs for the ring’s member VLANS.

6.

Enable FRRP.
CONFIG-FRRP mode.

no disable

Configuring and Adding the Member VLANs

Control and member VLANS are configured normally for Layer 2. Their status as Control or Member is 

determined at the FRRP group commands.

For more information about configuring VLANS in Layer 2 mode, refer to the 

Layer 2

 chapter.

Be sure to follow these guidelines:

• All VLANS must be in Layer 2 mode.
• Tag control VLAN ports. Member VLAN ports, except the Primary/Secondary interface, can be tagged 

or untagged.

• The control VLAN must be the same for all nodes on the ring.

To create the Members VLANs for this FRRP group, use the following commands on all of the Transit 
switches in the ring.

1.

Create a VLAN with this ID number.
CONFIGURATION mode.

interface vlan 

vlan-id

344

Force10 Resilient Ring Protocol (FRRP)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды