manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 630

3.

Enter ROUTER OSPF mode.
CONFIGURATION mode

router ospf 

process-id

 [vrf]

Process ID is the ID assigned when configuring OSPFv2 globally.

4.

Configure the area as a stub area.
CONFIG-ROUTER-OSPF-id mode

area 

area-id

 stub [no-summary]

Use the keywords 

no-summary

 to prevent transmission into the area of summary ASBR LSAs.

Area ID is the number or IP address assigned when creating the area.

Example of the 

show ip ospf database database-summary

 Command

To view which LSAs are transmitted, use the 

show ip ospf database 

process-id

 database-

summary

 command in EXEC Privilege mode.

Dell#show ip ospf 34 database database-summary

      OSPF Router with ID (10.1.2.100) (Process ID 34)

Area     ID Router Network S-Net S-ASBR Type-7 Subtotal

2.2.2.2  1         0       0     0      0      1

3.3.3.3  1         0       0     0      0      1

Dell#

To view information on areas, use the 

show ip ospf 

process-id

 command in EXEC Privilege mode.

Enabling Passive Interfaces

A passive interface is one that does not send or receive routing information.

Enabling passive interface suppresses routing updates on an interface. Although the passive interface 

does not send or receive routing updates, the network on that interface is still included in OSPF updates 

sent via other interfaces.
To suppress the interface’s participation on an OSPF interface, use the following command. This 
command stops the router from sending updates on that interface.

• Specify whether all or some of the interfaces are passive.

CONFIG-ROUTEROSPF- id mode

passive-interface {default | interface}

The default is enabled passive interfaces on ALL interfaces in the OSPF process.

Entering the physical interface type, slot, and number enables passive interface on only the identified 
interface.
– For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port/

subport information.

– For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

– For a port channel interface, enter the keywords 

port-channel

 then a number.

630

Open Shortest Path First (OSPFv2 and OSPFv3)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды