manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 602

31

Object Tracking

IPv4 or IPv6 object tracking is available on Dell Networking OS.
Object tracking allows the Dell Networking OS client processes, such as virtual router redundancy 
protocol (VRRP), to monitor tracked objects (for example, interface or link status) and take appropriate 
action when the state of an object changes.

NOTE: In Dell Networking OS release version 8.4.1.0, object tracking is supported only on VRRP.

 

Object Tracking Overview

Object tracking allows you to define objects of interest, monitor their state, and report to a client when a 

change in an object’s state occurs.

The following tracked objects are supported:

• Link status of Layer 2 interfaces
• Routing status of Layer 3 interfaces (IPv4 and IPv6)
• Reachability of IP hosts
• Reachability of IPv4 and IPv6 routes
• Metric thresholds of IPv4 and IPv6 routes
• Tracking of IP Hosts

In future releases, environmental alarms and available free memory will be supported. You can configure 
client applications, such as VRRP, to receive a notification when the state of a tracked object changes.

The following example shows how object tracking is performed. Router A and Router B are both 
connected to the internet via interfaces running OSPF. Both routers belong to a VRRP group with a virtual 
router at 10.0.0.1 on the local area network (LAN) side. Neither Router A nor Router B is the owner of the 
group. Although Router A and Router B use the same default VRRP priority (100), Router B would 
normally become the master for the VRRP group because it has a higher IP address.

You can create a tracked object to monitor the metric of the default route 0.0.0.0/0. After you configure 
the default route as a tracked object, you can configure the VRRP group to track the state of the route. In 
this way, the VRRP priority of the router with the better metric automatically becomes master of the VRRP 
group. Later, if network conditions change and the cost of the default route in each router changes, the 
mastership of the VRRP group is automatically reassigned to the router with the better metric.

602

Object Tracking

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды