manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 204 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 204

•

Create, change, or delete security keys

Related links

Configuring controller properties
Importing or auto importing foreign configuration
Clearing foreign configuration
Resetting controller configuration
Supported controllers
Summary of supported features for storage devices
Converting a physical disk to RAID or non-RAID mode

Configuring controller properties

You can configure the following properties for the controller:

•

Patrol read mode (auto or manual)

•

Start or stop patrol read if patrol read mode is manual

•

Patrol read unconfigured areas

•

Check consistency mode

•

Copyback mode

•

Load balance mode

•

Check consistency rate

•

Rebuild rate

•

BGI rate

•

Reconstruct rate

•

Enhanced auto import foreign configuration

•

Create or change security keys

You must have Login and Server Control privilege to configure the controller properties.

Patrol read mode considerations

Patrol read identifies disk errors to avoid disk failures, data loss, or corruption.

The Patrol Read does not run on a physical disk in the following circumstances:

•

The physical disk is not included in a virtual disk or assigned as a hot spare.

•

The physical disk is included in a virtual disk that is undergoing one of the following:

– A rebuild
– A reconfiguration or reconstruction
– A background initialization
– A check consistency

In addition, the Patrol Read operation suspends during heavy I/O activity and resumes when the I/O is complete.

NOTE: For more information on how often the Patrol Read operation runs when in auto mode, see the respective 
controller documentation.

NOTE: Patrol read mode operations such as Start and Stop are not supported if there are no virtual disks available in the 
controller. Though you can invoke the operations successfully using the iDRAC interfaces, the operations fail when the 
associated job is started.

204

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов