manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 82 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 82

Difference between FIPS-mode supported and FIPS-validated

Software that has been validated by completing the Cryptographic Module Validation Program is referred to as FIPS-validated. 
Because of the time it takes to complete FIPS-validation, not all versions of iDRAC are validated. For information about the latest 
status of FIPS-validation for iDRAC, see the Cryptographic Module Validation Program page on the NIST website.

Enabling FIPS Mode

CAUTION: Enabling FIPS mode resets iDRAC to factory-default settings. If you want to restore the settings, back up the 
server configuration profile (SCP) before you enable FIPS mode, and restore the SCP after iDRAC restarts.

NOTE: If you reinstall or upgrade iDRAC firmware, FIPS mode gets disabled.

Enabling FIPS mode using web interface

1.

On the iDRAC web interface, navigate to 

Overview

 → 

iDRAC Settings

 → 

Network

.

2.

Click 

Advanced Settings

 next to 

Options

.

3.

In 

FIPS Mode

, select 

Enabled 

and click 

Apply

.

4.

A message appears prompting you to confirm the change. Click 

OK

.

iDRAC restarts in FIPS mode. Wait for at least 60 seconds before you reconnect to iDRAC.

5.

Install a trusted certificate for iDRAC.

NOTE: The default SSL certificate is not allowed in FIPS mode.

NOTE: Some iDRAC interfaces, such as the standards-compliant implementations of IPMI and SNMP, do not support 
FIPS-compliance.

Enabling FIPS mode using RACADM

Use RACADM CLI to execute the following command:

racadm set iDRAC.Security.FIPSMode <Enable>

Disabling FIPS mode

To disable FIPS mode, you must reset iDRAC to the factory-default settings.

Configuring services

You can configure and enable the following services on iDRAC:

Local Configuration

Disable access to iDRAC configuration (from the host system) using Local RACADM and iDRAC Settings 
utility.

Web Server

Enable access to iDRAC web interface. If you disable the web interface, remote RACADM also gets 
disabled. Use local RACADM to re-enable the web server and remote RACADM.

SSH

Access iDRAC through firmware RACADM.

Telnet

Access iDRAC through firmware RACADM.

Remote RACADM

Remotely access iDRAC.

Redfish

Enables support for Redfish RESTful API.

SNMP Agent

Enables support for SNMP queries (GET, GETNEXT, and GETBULK operations) in iDRAC.

Automated System 
Recovery Agent

Enable Last System Crash Screen.

VNC Server

Enable VNC server with or without SSL encryption.

82

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов