manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 121 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 121

The following example provides a sample 

/etc/grub.conf 

file that shows the changes described in this procedure.

# grub.conf generated by anaconda

# Note that you do not have to rerun grub after making changes to this file

# NOTICE: You do not have a /boot partition. This means that all 

# kernel and initrd paths are relative to /, e.g.

# root (hd0,0)

# kernel /boot/vmlinuz-version ro root=/dev/sdal

# initrd /boot/initrd-version.img

#boot=/dev/sda 

default=0 

timeout=10 

#splashimage=(hd0,2)/grub/splash.xpm.gz

serial --unit=1 --speed=57600 

terminal --timeout=10 serial  

title Red Hat Linux Advanced Server (2.4.9-e.3smp) root (hd0,0)

kernel /boot/vmlinuz-2.4.9-e.3smp ro root=/dev/sda1 hda=ide-scsi console=ttyS0

console=ttyS1,115200n8r 

initrd /boot/initrd-2.4.9-e.3smp.img 

title Red Hat Linux Advanced Server-up (2.4.9-e.3) root (hd0,00) 

kernel /boot/vmlinuz-2.4.9-e.3 ro root=/dev/sda1 s 

initrd /boot/initrd-2.4.9-e.3.im

4.

To enable multiple GRUB options to start Virtual Console sessions through the RAC serial connection, add the following line to 
all options:

console=ttyS1,115200n8r console=tty1

The example shows 

console=ttyS1,57600

 added to the first option.

NOTE: If the boot loader or operating system provides serial redirection such as GRUB or Linux, then the BIOS 
Redirection After Boot setting must be disabled. This is to avoid potential race condition of multiple components 
accessing the serial port.

Enabling login to the virtual console after boot

In the file 

/etc/inittab

, add a new line to configure 

agetty

 on the COM2 serial port:

co:2345:respawn:/sbin/agetty -h -L 57600 ttyS1 ansi

The following example shows a sample file with the new line.

#inittab This file describes how the INIT process should set up

#the system in a certain run-level.

#Author:Miquel van Smoorenburg

#Modified for RHS Linux by Marc Ewing and Donnie Barnes

#Default runlevel. The runlevels used by RHS are:

#0 - halt (Do NOT set initdefault to this)

#1 - Single user mode

#2 - Multiuser, without NFS (The same as 3, if you do not have #networking)

#3 - Full multiuser mode

#4 - unused

#5 - X11

#6 - reboot (Do NOT set initdefault to this)

id:3:initdefault:

#System initialization.

si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0

l1:1:wait:/etc/rc.d/rc 1

l2:2:wait:/etc/rc.d/rc 2

l3:3:wait:/etc/rc.d/rc 3

l4:4:wait:/etc/rc.d/rc 4

l5:5:wait:/etc/rc.d/rc 5

l6:6:wait:/etc/rc.d/rc 6

#Things to run in every runlevel.

121

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов