manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 217 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 217

•

Split Mode

•

Split Mode 4:20

•

Split Mode 8:16

•

Split Mode 16:8

•

Split Mode 20:4

•

Information Not Available

4.

From the 

Apply Operation Mode

 drop-down menu, select 

Apply Now

 to apply the actions immediately, and then click 

Apply

.

A job ID is created.

5.

Go to the 

Job Queue

 page and verify that it displays the status as Completed for the job.

6.

Power cycle the system for the setting to take effect.

Configuring enclosure using RACADM

To configure the enclosure or backplane, use the 

set

 command with the objects in 

BackplaneMode

.

For example, to set the BackplaneMode attribute to split mode:

1.

Run the following command to view the current backplane mode:

racadm get storage.enclosure.1.backplanecurrentmode

The output is:

BackplaneCurrentMode=UnifiedMode

2.

Run the following command to view the requested mode:

racadm get storage.enclosure.1.backplanerequestedmode

The output is:

BackplaneRequestedMode=None

3.

Run the following command to set the requested backplane mode to split mode:

racadm set storage.enclosure.1.backplanerequestedmode "splitmode"

The message is displayed indicating that the command is successful.

4.

Run the following command to verify if the 

backplanerequestedmode

 attribute is set to split mode:

racadm get storage.enclosure.1.backplanerequestedmode

The output is:

BackplaneRequestedMode=None (Pending=SplitMode)

5.

Run 

storage get controllers

 command and note down the controller instance ID.

6.

Run the following command to create a job:

racadm jobqueue create <controller instance ID> -s TIME_NOW --realtime

A job ID is returned.

7.

Run the following command to query the job status:

racadm jobqueue view -i JID_xxxxxxxx

where, 

JID_xxxxxxxx

 is the job ID from step 6.

The status is displayed as Pending.
Continue to query the job ID until you view the Completed status (this process may take up to three minutes).

8.

Run the following command to view the 

backplanerequestedmode

 attribute value:

racadm get storage.enclosure.1.backplanerequestedmode

The output is:

BackplaneRequestedMode=SplitMode

217

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов