manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя

Dell iDRAC 7 - мощное удаленное управление и мониторинг серверной инфраструктуры. Получите бесплатное Руководство пользователя для настройки и управления устройством. Скачайте его с manualshive.com прямо сейчас! Повысьте производительность сервера с помощью iDRAC 7.

Поделиться
Скачать
background image

You can perform the diagnostics immediately or schedule it on a particular day and time, specify the type of diagnostics, and the 
type of reboot.

For the schedule, you can specify the following:

•

Start time – Run the diagnostic at a future day and time. If you specify TIME NOW, the diagnostic is run on the next reboot.

•

End time - Run the diagnostic until a date and time after the Start time. If it is not started by End time, it is marked as failed with 

End time expired. If you specify TIME NA, then the wait time is not applicable.

The types of diagnostic tests are:

•

Express test

•

Extended test

•

Both in a sequence

The types of reboot are:

•

Power cycle system

•

Graceful shutdown (waits for operating system to turn off or for system restart)

•

Forced Graceful shutdown (signals operating system to turn off and waits for 10 minutes. If the operating system does not turn 

off, the iDRAC power cycles the system)

Only one diagnostic job can be scheduled or run at one time. A diagnostic job can complete successfully, complete with error, or is 
unsuccessful. The diagnostic events including the results are recorded in Lifecycle Controller log. You can retrieve the results of the 
last diagnostic execution using remote RACADM or WSMAN.

You can export the diagnostic results of the last completed diagnostics that were scheduled remotely to a network share such as 
CIFS or NFS. The maximum file size is 5 MB.

You can cancel a diagnostic job when the status of the job is Unscheduled or Scheduled. If the diagnostic is running, then restart the 
system to cancel the job.

Before you run the remote diagnostics, make sure that:

•

Lifecycle Controller is enabled.

•

You have Login and Server Control privileges.

Scheduling remote automated diagnostics using RACADM

•

To run the remote diagnostics and save the results on the local system, use the following command:

racadm diagnostics run -m <Mode> -r <reboot type> -s <Start Time> -e <Expiration Time>

•

To export the last run remote diagnostics results, use the following command:

racadm diagnostics export -f <file name> -l <NFS / CIFS share> -u <username> -p 

<password>

For more information about the options, see the 

iDRAC RACADM Command Line Interface Reference Guide

 available at 

dell.com/

idracmanuals

.

Viewing post codes

Post codes are progress indicators from the system BIOS, indicating various stages of the boot sequence from power-on-reset, and 
allows you to diagnose any faults related to system boot-up. The 

Post Codes

 page displays the last system post code prior to 

booting the operating system.
To view the Post Codes, go to 

Overview

 → 

Server

 → 

Troubleshooting

 → 

Post Code

.

The 

Post Code 

page displays the system health indicator, a hexadecimal code, and a description of the code.

281

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iDRAC 7

Alcatel OA5305-13maw-EU Datasheet preview
OA5305-13maw-EU
Бренд: Alcatel Страницы: 4
SerVision MVG 400 Installation Manual preview
MVG 400
Бренд: SerVision Страницы: 40
MatchX Box EU MX1701 User Manual preview
Box EU MX1701
Бренд: MatchX Страницы: 20
Arris Touchstone TG862G User Manual preview
Touchstone TG862G
Бренд: Arris Страницы: 48
Gree MG30-24/D1(B) Installation And Operation Manual preview
MG30-24/D1(B)
Бренд: Gree Страницы: 67
Vantron VT-M2M-C335 User Manual preview
VT-M2M-C335
Бренд: Vantron Страницы: 15
Televes 769301 Manual preview
769301
Бренд: Televes Страницы: 46
enphase Envoy Communications Gateway Installation And Operation Manual preview
Envoy Communications Gateway
Бренд: enphase Страницы: 100
Zoom IG-4160 User Manual preview
IG-4160
Бренд: Zoom Страницы: 48
Zoom 4150 Installation Reference Manual preview
4150
Бренд: Zoom Страницы: 72
Omron PROFIBUS DP GATEWAY Operation Manual preview
PROFIBUS DP GATEWAY
Бренд: Omron Страницы: 95
peoplenet PCT Troubleshooting Manual preview
PCT
Бренд: peoplenet Страницы: 19
Davolink DV-302 Operation Manual preview
DV-302
Бренд: Davolink Страницы: 65
schmalenberger FLUVO 27143 Operator'S Manual preview
FLUVO 27143
Бренд: schmalenberger Страницы: 28
Packet Power Ethernet Gateway V4 Quick Start Manual preview
Ethernet Gateway V4
Бренд: Packet Power Страницы: 2
evertz 78908MG-10GE2 User Manual preview
78908MG-10GE2
Бренд: evertz Страницы: 52
Weir MPM Setup Manual preview
MPM
Бренд: Weir Страницы: 52
Netphonic NG-188 User Manual preview
NG-188
Бренд: Netphonic Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды