manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 130 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 130

NOTE: Using Active Directory to recognize iDRAC users is supported on the Microsoft Windows 2000, Windows Server 
2003, and Windows Server 2008 operating systems.

You can configure user authentication through Active Directory to log in to the iDRAC. You can also provide role-based authority, 
which enables an administrator to configure specific privileges for each user.

The iDRAC role and privilege names have changed from earlier generation of servers. The role names are:

Table 19. iDRAC roles

Current Generation

Prior Generation

Privileges

Administrator

Administrator

Login, Configure, Configure Users, Logs, System Control, Access Virtual 

Console, Access Virtual Media, System Operations, Debug

Operator

Power User

Login, Configure, System Control, Access Virtual Console, Access Virtual 

Media, System Operations, Debug

Read Only

Guest User

Login

None

None

None

Table 20. iDRAC user privileges

Current Generation

Prior Generation

Description

Login

Login to iDRAC

Enables the user to log in to iDRAC.

Configure

Configure iDRAC

Enables the user to configure iDRAC.

Configure Users

Configure Users

Enables the user to allow specific users to access the system.

Logs

Clear Logs

Enables the user to clear the System Event Log (SEL).

System Control

Execute Server Control 

Commands

Allows power cycling the host system.

Access Virtual Console Access Virtual Console 

Redirection (for blade 

servers)

Access Virtual Console (for 

rack and tower servers)

Enables the user to run Virtual Console.

Access Virtual Media

Access Virtual Media

Enables the user to run and use Virtual Media.

System Operations

Test Alerts

Allows user initiated and generated events, and information is sent as an 

asynchronous notification and logged.

Debug

Execute Diagnostic 

Commands

Enables the user to run diagnostic commands.

Related links

Prerequisites for using Active Directory authentication for iDRAC
Supported Active Directory authentication mechanisms

Prerequisites for using Active Directory authentication for iDRAC

To use the Active Directory authentication feature of iDRAC, make sure that you have:

130

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов