Dell iDRAC 7 Скачать руководство пользователя страница 240 | Manualshive

Страница: 240 / 309

Dell iDRAC 7 Скачать руководство пользователя страница 240

16

Installing and using VMCLI utility

The Virtual Media Command Line Interface (VMCLI) utility is an interface that provides virtual media features from the management
station to iDRAC on the managed system. Using this utility you can access virtual media features, including image files and physical
drives, to deploy an operating system on multiple remote systems in a network.

NOTE: VMCLI supports only the TLS 1.0 security protocol.

The VMCLI utility supports the following features:

•

Manage removable devices or images that are accessible through virtual media.

•

Automatically terminate the session when the iDRAC firmware

Boot Once

option is enabled.

•

Secure communications to iDRAC using Secure Sockets Layer (SSL).

•

Execute VMCLI commands until:

– The connections automatically terminate.
– An operating system terminates the process.

NOTE: To terminate the process in Windows, use the Task Manager.

Installing VMCLI

The VMCLI utility is included in the

Dell Systems Management Tools and Documentation

DVD.

To install the VMCLI utility:

1.

Insert the

Dell Systems Management Tools and Documentation

DVD into the management station’s DVD drive.

2.

Follow the on-screen instructions to install DRAC tools.

3.

After successful install, check

install\Dell\SysMgt\rac5

folder to make sure

vmcli.exe

exists. Similarly, check the respective

path for UNIX.
The VMCLI utility is installed on the system.

Running VMCLI utility

•

If the operating system requires specific privileges or group membership, you require similar privileges to run the VMCLI

commands.

•

On Windows systems, non-administrators must have

Power User

privileges to run the VMCLI utility.

•

On Linux systems, to access iDRAC, run VMCLI utility, and log user commands, non-administrators must prefix

sudo

to the

VMCLI commands. However, to add or edit users in the VMCLI administrators group, use the

visudo

command.

VMCLI syntax

The VMCLI interface is identical on both Windows and Linux systems. The VMCLI syntax is:

VMCLI [parameter] [operating_system_shell_options]

For example,

vmcli -r iDRAC-IP-address:iDRAC-SSL-port

240

«
...
238
239
240
241
242
...
»

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов