Dell iDRAC 7 Скачать руководство пользователя страница 66

Страница: 66 / 309

•

A custom repository

NOTE: For more information about DRM, see delltechcenter.com/repositorymanager.

NOTE: Lifecycle Controller must be enabled and you must have Server Control privilege to update firmware for devices
other than iDRAC.

To update device firmware using a repository:

In the iDRAC web interface, go to

Overview

→

iDRAC Settings

→

Update and Rollback

The

Firmware Update

page is displayed.

On the

Update

tab, select

Network Share

as the

File Location

In the

Catalog Location

section, enter the network setting details.

While specifying the network share settings, it is recommended to avoid special characters for user name and password or
percent encode the special characters. For more information, see

For information about the fields, see the

iDRAC Online Help

Click

Check for Update

The

Update Details

section displays a comparison report showing the current firmware versions and the firmware versions

available in the repository.

NOTE: Updates that are not supported, or are not applicable to the system or installed hardware, are not included in
the comparison report.

Select the required updates and do one of the following:

NOTE: A version marked as Available does not always indicate that it is the latest version available or newer than
the version already installed.

•

For firmware images that do not require a host system reboot, click

Install

. For example, .d7 firmware file.

•

For firmware images that require a host system reboot, click

Install and Reboot

Install Next Reboot

•

To cancel the firmware update, click

Cancel

When you click

Install

Install and Reboot

, or

Install Next Reboot

, the message

Updating Job Queue

is displayed.

Click

Job Queue

to display the

Job Queue

page, where you can view and manage the staged firmware updates or click

refresh the current page and view the status of the firmware update.

Содержание iDRAC 7






















































































































































































































































































































Результаты поиска

Содержание iDRAC 7

Отзывы:

Dell iDRAC 7, Руководство пользователя, Страница: 66 / 309

Результаты поиска

Содержание iDRAC 7

Отзывы: