manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 275 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 275

– If enabled, you can specify a time after which the Quick Sync mode is turned off. To turn on, press the activation button 

again.

– If disabled, the timer does not allow you to enter a time-out period.

•

Time-out Limit — Allows you specify the time after which the Quick Sync mode is disabled. The default value is 30 seconds.

You must have Server Control privilege to configure the settings. A server reboot is not required for the settings to take effect.

An entry is logged to the Lifecycle Controller log when the configuration is modified.

Configuring iDRAC Quick Sync settings using web interface

To configure iDRAC Quick Sync:

1.

In the iDRAC web interface, go to 

Overview

 → 

Hardware

 → 

Front Panel

.

2.

In the 

iDRAC Quick Sync

 section, from the 

Access

 drop-down menu, select one of the following to provide access to the 

Android mobile device:
•

Read-write

•

Read-only

•

Disabled

3.

Enable the Timer.

4.

Specify the Timeout value.
For more information about the fields, see the 

iDRAC Online Help

.

5.

Click 

Apply

 to apply the settings.

Configuring iDRAC Quick Sync settings using RACADM

To configure the iDRAC Quick Sync feature, use the racadm objects in the 

System.QuickSync

 group. For more information, see the 

iDRAC RACADM Command Line Reference Guide

 available at 

dell.com/esmmanuals

.

Configuring iDRAC Quick Sync settings using iDRAC settings utility

To configure iDRAC Quick Sync:

1.

In the iDRAC Settings Utility, go to 

Front Panel Security

.

The 

iDRAC Settings Front Panel Security

 page is displayed.

2.

In the 

iDRAC Quick Sync

 section:

•

Specify the access level.

•

Enable Timeout.

•

Specify the User Defined Timeout Limit (15 seconds to 3600 seconds).

For more information about the fields, see the 

iDRAC Online Help

.

3.

Click 

Back

, click 

Finish

, and then click 

Yes

.

The settings are applied.

Using mobile device to view iDRAC information

To view iDRAC information from the mobile device, see the 

OpenManage Mobile User’s Guide

 available at 

dell.com/support/

manuals

 for the steps.

275

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов