manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 260 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 260

19

Using iDRAC Service Module

The iDRAC Service Module is a software application that is recommended to be installed on the server (it is not installed by default). 
It complements iDRAC with monitoring information from the operating system. It complements iDRAC by providing additional data 
to work with iDRAC interfaces such as the Web interface, RACADM, and WSMAN. You can configure the features monitored by 
the iDRAC Service Module to control the CPU and memory consumed on the server’s operating system.

NOTE: You can use the iDRAC Service Module only if you have installed iDRAC Express or iDRAC Enterprise license.

Before using iDRAC Service Module, ensure that:

•

You have login, configure, and server control privileges in iDRAC to enable or disable the iDRAC Service Module features.

•

You do not disable the 

iDRAC Configuration using local RACADM

 option.

•

OS to iDRAC pass-through channel is enabled through the internal USB bus in iDRAC.

NOTE: 

– When iDRAC Service Module runs for the first time, by default it enables the OS to iDRAC pass-through channel in 

iDRAC. If you disable this feature after installing the iDRAC Service Module, then you must enable it manually in iDRAC.

– If the OS to iDRAC pass-through channel is enabled through LOM in iDRAC, then you cannot use the iDRAC Service 

Module.

 

Installing iDRAC Service Module

You can download and install the iDRAC Service Module from 

dell.com/support

. You must have administrator privilege on the 

server’s operating system to install the iDRAC Service Module. For information on installation, see the 

iDRAC Service Module 

Installation Guide

 available at 

dell.com/support/manuals

.

NOTE: This feature is not applicable for Dell Precision PR7910 systems.

Supported operating systems for iDRAC Service Module

For the list of operating systems supported by the iDRAC Service Module, see the 

iDRAC Service Module Installation Guide

 available 

at 

dell.com/openmanagemanuals

.

iDRAC Service Module monitoring features

The iDRAC Service Module (iSM) provides the following monitoring features:

•

Redfish profile support for network attributes

•

iDRAC Hard Reset

•

iDRAC access via Host OS (Experimental Feature)

•

In-band iDRAC SNMP alerts

•

View operating system (OS) information

•

Replicate Lifecycle Controller logs to operating system logs

•

Perform automatic system recovery options

•

Populate Windows Management Instrumentation (WMI) Management Providers

260

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов