Dell iDRAC 7 Скачать руководство пользователя страница 271 | Manualshive

Страница: 271 / 309

Dell iDRAC 7 Скачать руководство пользователя страница 271

•

A USB device is in use by iDRAC and you attempt to modify the USB Management Port Mode.

•

A USB device is in use by iDRAC and you remove the device.

Configuring USB management port using web interface

To configure the USB port:

1.

In the iDRAC Web interface, go to

Overview

→

Hardware

→

USB Management Port

.

The

Configure USB Management Port

page is displayed.

2.

From the

USB Management Port Mode

drop-down menu, select any of the following options:

•

Automatic

— USB Port is used by iDRAC or the server’s operating system.

•

Standard OS Use

— USB port is used by the server OS.

•

iDRAC Direct only

— USB pot is used by iDRAC.

3.

From the iDRAC Managed: USB XML Configuration drop-down menu, select options to configure a server by importing XML
configuration files stored on a USB drive:
•

Disabled

•

Enabled only when server has default credential settings

•

Enabled

For information about the fields, see the

iDRAC Online Help

.

4.

Click

Apply

to apply the settings.

Configuring USB management port using RACADM

To configure the USB management port, use the following RACADM sub commands and objects:

•

To view the USB port status:

racadm get iDRAC.USB.ManagementPortStatus

•

To view the USB port configuration:

racadm get iDRAC.USB.ManagementPortMode

•

To modify the USB port configuration:

racadm set iDRAC.USB.ManagementPortMode <Automatic|Standard OS Use|iDRAC|>

NOTE: Ensure that you enclose the Standard OS Use attribute within single quotes while using in the RACADM set

command.

•

To view USB device inventory:

racadm hwinventory

•

To set up over current alert configuration:

racadm eventfilters

For more information, see the

iDRAC RACADM Command Line Interface Reference Guide

available at

dell.com/esmmanuals

.

Configuring USB management port using iDRAC settings utility

To configure the USB port:

1.

In the iDRAC Settings Utility, go to

Media and USB Port Settings

.

The

iDRAC Settings Media and USB Port Settings

page is displayed.

2.

From the

USB Management Port Mode

drop-down menu, do the following:

•

Automatic

— USB Port is used by iDRAC or the server’s operating system.

•

Standard OS Use

— USB port is used by the server OS.

•

iDRAC Direct only

— USB pot is used by iDRAC.

3.

From the

iDRAC Direct: USB Configuration XML

drop-down menu, select options to configure a server by importing server

configuration profile stored on a USB drive:
•

Disabled

271

«
...
269
270
271
272
273
...
»

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов