Dell iDRAC 7 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 309

Dell iDRAC 7 Скачать руководство пользователя страница 63

•

Backplane update for internal and external enclosures

•

OS Collector

CAUTION: The PSU firmware update may take several minutes depending on the system configuration and PSU model.
To avoid damaging the PSU, do not interrupt the update process or power on the system during PSU firmware update.

You must upload the required firmware to iDRAC. After the upload is complete, the current version of the firmware installed on the
device and the version being applied is displayed. If the firmware being uploaded is not valid, an error message is displayed. Updates
that do not require a reboot are applied immediately. Updates that require a system reboot are staged and committed to run on the
next system reboot. Only one system reboot is required to perform all updates.

After the firmware is updated, the

System Inventory

page displays the updated firmware version and logs are recorded.

The supported firmware image file types are:

•

.exe — Windows-based Dell Update Package (DUP)

•

.d7 — Contains both iDRAC and Lifecycle Controller firmware

For files with .exe extension, you must have the System Control privilege. The Remote Firmware Update licensed feature and
Lifecycle Controller must be enabled.

For files with .d7 extension, you must have the Configure privilege.

NOTE: After upgrading the iDRAC firmware, you may notice a difference in the time stamp displayed in the Lifecycle
Controller log until the iDRAC time is reset using NTP. The Lifecycle log displays the BIOS time until the iDRAC time is
reset.

You can perform firmware updates by using the following methods:

•

Uploading a supported image type, one at a time, from a local system or network share.

•

Connecting to an FTP, TFTP, or HTTP site or a network repository that contains Windows DUPs and a corresponding catalog

file.
You can create custom repositories by using the Dell Repository Manager. For more information, see

Dell Repository Manager

Data Center User's Guide

. iDRAC can provide a difference report between the BIOS and firmware installed on the system and

the updates available in the repository. All applicable updates contained in the repository are applied to the system. This feature
is available with iDRAC Enterprise license.

•

Scheduling recurring automated firmware updates by using the catalog file and custom repository.

There are multiple tools and interfaces that can be used to update the iDRAC firmware. The following table is applicable only to
iDRAC firmware. The table lists the supported interfaces, image-file types, and whether Lifecycle Controller must be in enabled
state for the firmware to be updated.

Table 9. Image file types and dependencies

.D7 Image

iDRAC DUP

Interface

Supported

Requires LC enabled

Supported

Requires LC enabled

BMCFW64.exe utility Yes

No

No

N/A

Racadm FWUpdate
(old)

Yes

No

No

N/A

Racadm Update
(new)

Yes

Yes

Yes

Yes

iDRAC UI

Yes

Yes

Yes

Yes

WSMAN

Yes

Yes

Yes

Yes

In-band OS DUP

No

N/A

Yes

No

63

«
...
61
62
63
64
65
...
»

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов