manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 26 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 26

Feature

Basic 

Manage

ment 

(iDRAC

7)

iDRAC8 

Basic

iDRAC7 

Express

iDRAC8 

Express

iDRAC7 

Express 

for 

Blades

iDRAC8 

Express for 

Blades

iDRAC7 

Enterprise

iDRAC8 

Enterprise

License management

No

Yes

No

Yes

No

Yes

No

Yes

[1] Requires vFlash SD card media.

[2] 500 series and lower rack and tower servers require a hardware card to enable this feature; this hardware is offered at additional 
cost.

[3] Remote agent-free update feature is available only using IPMI.

[4] Available only using IPMI.

[5] Requires OMSA agent on target server.

Interfaces and protocols to access iDRAC

The following table lists the interfaces to access iDRAC.

NOTE: Using more than one interface at the same time may generate unexpected results.

Table 3. Interfaces and protocols to access iDRAC

Interface or Protocol

Description

iDRAC Settings Utility

Use the iDRAC Settings utility to perform pre-OS operations. It has a subset of the features that are 

available in iDRAC web interface along with other features.

To access iDRAC Settings utility, press 

<F2>

 during boot and then click 

iDRAC Settings

 on the 

System 

Setup Main Menu

 page.

iDRAC web Interface

Use the iDRAC web interface to manage iDRAC and monitor the managed system. The browser 
connects to the web server through the HTTPS port. Data streams are encrypted using 128-bit SSL to 
provide privacy and integrity. Any connection to the HTTP port is redirected to HTTPS. Administrators 
can upload their own SSL certificate through an SSL CSR generation process to secure the web server. 
The default HTTP and HTTPS ports can be changed. The user access is based on user privileges.

RACADM

Use this command-line utility to perform iDRAC and server management. You can use RACADM locally 
and remotely.
•

Local RACADM command-line interface runs on the managed systems that have Server 

Administrator installed. Local RACADM communicates with iDRAC through its in-band IPMI host 

interface. Since it is installed on the local managed system, users are required to log in to the 

operating system to run this utility. A user must have a full administrator privilege or be a root user 

to use this utility.

•

Remote RACADM is a client utility that runs on a management station. It uses the out-of-band 

network interface to run RACADM commands on the managed system and uses the HTTPs 

channel. The 

–r

 option runs the RACADM command over a network.

•

Firmware RACADM is accessible by logging in to iDRAC using SSH or telnet. You can run the 

firmware RACADM commands without specifying the iDRAC IP, user name, or password.

•

You do not have to specify the iDRAC IP, user name, or password to run the firmware RACADM 

commands. After you enter the RACADM prompt, you can directly run the commands without the 

racadm prefix.

Server LCD Panel/
Chassis LCD Panel

Use the LCD on the server front panel to:
•

View alerts, iDRAC IP or MAC address, user programmable strings.

•

Set DHCP

26

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов