manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 197 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 197

Related links

Choosing operation mode using RACADM

Converting a physical disk to RAID or non-RAID mode

Converting a physical disk to RAID mode enables the disk for all RAID operations. When a disk is in a non-RAID mode, the disk is 
exposed to the operating system unlike unconfigured good disks and is used in a direct pass-through mode.

You can convert the physical disk drives to RAID or non-RAID mode by:

•

Using iDRAC interfaces such as iDRAC web interface, RACADM, or WS-MAN.

•

Pressing Ctrl+R while restarting the server and selecting the required controller.

NOTE: Converting the mode is not supported on PERC hardware controllers running in HBA mode.

NOTE: Converting to non-RAID mode for PERC 8 controllers is supported only for PERC H310 and H330 controllers.

NOTE: If the physical drives connected to a PERC controller are in non-RAID mode, the size of the disk displayed in the 
iDRAC interfaces, such as iDRAC GUI, RACADM, and WS-MAN, may be slightly less than the actual size of the disk. 
However, you can use the full capacity of the disk to deploy operating systems.

Converting physical disks to RAID capable or non-RAID mode using the iDRAC web interface

To convert the physical disks to RAID mode or non-RAID mode, perform the following steps:

1.

In the iDRAC web interface, click 

Overview

 → 

Storage

 → 

Physical Disks

 → 

Setup

.

The 

Setup

 page is displayed.

2.

From the 

Controller

 drop-down menu, select a controller.

The physical disks associated with the selected controller are displayed.

3.

From the 

Action — Assign to All

 drop-down box, select the required option (

Convert to RAID

 or 

Convert to Non-RAID

) for 

all the disks, or select the option for specific disks from the 

Action

 drop-down menu.

4.

From the 

Apply Operation Mode

 drop-down menu, select when you want to apply the settings.

5.

Click 

Apply

.

The settings are applied based on the option selected in the operation mode.

Converting physical disks to RAID capable or non-RAID mode using RACADM

Depending on whether you want to convert to RAID or Non-RAID mode, use the following RACADM commands

•

To convert to RAID mode, use the 

racadm storage converttoraid

 command.

•

To convert to Non-RAID mode, use the 

racadm storage converttononraid

 command.

For more information about the commands, see the 

iDRAC RACADM Command Line Reference Guide

 available at 

dell.com/

esmmanuals

.

Managing virtual disks

You can perform the following operations for the virtual disks:

•

Create

•

Delete

•

Edit policies

•

Initialize

•

Check consistency

•

Cancel check consistency

•

Encrypt virtual disks

197

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов