manualshive.com logo in svg

Dell iDRAC 7, Руководство пользователя, Страница: 206 / 309

Поделиться
Скачать
Dell iDRAC 7 Скачать руководство пользователя страница 206

The 

Current Value

 column displays the existing values for each property. You can modify this value by selecting the option 

from the 

Action

 drop-down menu for each property.

For information about the fields, see the 

iDRAC Online Help

.

4.

From the 

Apply Operation Mode

 drop-down menu, select when you want to apply the settings.

5.

Click 

Apply

.

Based on the selected operation mode, the settings are applied.

Configuring controller properties using RACADM

•

To set Patrol Read Mode:

racadm set storage.controller.<index>.PatrolReadMode  {Automatic | Manual | Disabled}

•

If Patrol read mode is set to manual, use the following commands to start and stop Patrol read Mode:

racadm storage patrolread:<Controller FQDD> -state {start|stop}

NOTE: Patrol read mode operations such as Start and Stop are not supported if there are no virtual disks available in 
the controller. Though you can invoke the operations successfully using the iDRAC interfaces, the operations will fail 
when the associated job is started.

•

To specify the Check Consistency Mode, use 

Storage.Controller.CheckConsistencyMode

 object.

•

To enable or disable the Copyback Mode, use 

Storage.Controller.CopybackMode

 object.

•

To enable or disable the Load Balance Mode, use 

Storage.Controller.PossibleloadBalancedMode 

object.

•

To specify the percentage of the system's resources dedicated to perform a check consistency on a redundant virtual disk, use 

Storage.Controller.CheckConsistencyRate

 object.

•

To specify the percentage of the controller's resources dedicated to rebuild a failed disk, use 

Storage.Controller.RebuildRate 

object

•

To specify the percentage of the controller's resources dedicated to perform the background initialization (BGI) of a virtual disk 
after it is created, use

Storage.Controller.BackgroundInitializationRate

 object

•

To specify the percentage of the controller's resources dedicated to reconstruct a disk group after adding a physical disk or 
changing the RAID level of a virtual disk residing on the disk group, use 

Storage.Controller.ReconstructRate

 object

•

To enable or disable the enhanced auto import of foreign configuration for the controller, use 

Storage.Controller.EnhancedAutoImportForeignConfig

 object

•

To create, modify, or delete security key to encrypt virtual drives:

racadm storage createsecuritykey:<Controller FQDD> -key <Key id> -passwd <passphrase>

racadm storage modifysecuritykey:<Controller FQDD> -key <key id> -oldpasswd <old 

passphrase> -newpasswd <new passphrase>

racadm storage deletesecuritykey:<Controller FQDD>

Importing or auto importing foreign configuration

A foreign configuration is data residing on physical disks that have been moved from one controller to another. Virtual disks residing 
on physical disks that have been moved are considered to be a foreign configuration.

You can import foreign configurations so that virtual disks are not lost after moving Physical Disks. A foreign configuration can be 
imported only if it contains a virtual disk that is in either Ready or Degraded state or a hotspare that is dedicated to a virtual disk 
which can be imported or is already present.

All of the virtual disk data must be present, but if the virtual disk is using a redundant RAID level, the additional redundant data is not 
required.

For example, if the foreign configuration contains only one side of a mirror in a RAID 1 virtual disk, then the virtual disk is in a 
Degraded state and can be imported. If the foreign configuration contains only one physical disk that was originally configured as a 
RAID 5 using three physical disks, then the RAID 5 virtual disk is in a Failed state and cannot be imported.

In addition to virtual disks, a foreign configuration may consist of a physical disk that was assigned as a hot spare on one controller 
and then moved to another controller. The Import Foreign Configuration task imports the new physical disk as a hot spare. If the 

206

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов