Dell 5110cn - Color Laser Printer Скачать руководство пользователя страница 174

Страница: 174 / 447

To specify the execution time for one PostScript job. The change becomes effective after the printer is turned
off and then on again.

Values:

Off*

Job timeout does not occur.

1-900min.

A PostScript error occurs if processing is not completed after the specified time.

Init PS Disk

Purpose:

To initialize the PostScript file system on the optional hard disk.

NOTE:

The

Init PS Disk

menu is only displayed when an optional hard disk is installed on your

printer.

PaperSelectMode

Purpose:

To specify the way to select the tray for PostScript mode. The change becomes effective after the printer is
turned off and then on again.

Value:

Auto*

The tray is selected as the same setting as in the PCL mode.

Select FromTray

The tray is selected in a method compatible with regular Post Script printers.

Panel Settings

Use the

Panel Settings

menu to set a password to limit access to the menus. This prevents items from

being change accidentally.

NOTE:

Values marked by an asterisk (*) are the factory default menu settings.

Содержание 5110cn - Color Laser Printer
































































































































































































































































































































































































































































Результаты поиска

Содержание 5110cn - Color Laser Printer

Отзывы:

Похожие инструкции для 5110cn - Color Laser Printer

Бренды по названию

Популярные бренды

Dell 5110cn - Color Laser Printer, Руководство пользователя

Результаты поиска

Содержание 5110cn - Color Laser Printer

Отзывы:

Похожие инструкции для 5110cn - Color Laser Printer

Бренды по названию

Популярные бренды