Chevrolet 1977 10 Series, Руководство по ремонту, Страница: 298 / 468

(350)7A-14
OVERHAUL MANUAL
OUTPUT RING GEAR
A N D OUTPUT SHAFT
ASSEMBLY
Wii
I
OUTPUT
RING
GEAR
OUTPUT RING
GEAR TO CASE
NEEDLE BEARING
Fig. 7 A - 4 5 B - R e m o v i n g O u t p u t Ring Gear and S h a ft A s s e m b ly
18. Remove output ring gear and shaft assembly from
case (fig. 7A-45B).
NOTE:
On Trucks, also remove grease pack sleeves
from output shaft before taking shaft from case.
19. Remove reaction carrier to output ring gear tanged
(front) thrust washer (fig. 7A-46B).
Fig. 7 A - 4 7 B - R e m o v i n g O u t p u t Ring Gear to Case Ne edle
B e a rin g A s s e m b ly
20. Remove output ring gear to case needle bearing
assembly (fig. 7A-47B).
21. Compress low and reverse clutch piston spring
retainer using tool J-23327 (fig. 7A-48B) and remove piston
retaining ring and spring retainer.
OUTPUT RING GEAR
TANGED THRUST WASHER
Fig. 7A-46B--Removing Output Ring Gear Tanged Thrust
Washer
Fig. 7 A - 4 8 B - -C o m p re s s in g L o w and Reverse C lu tch Piston
Sp r in g R e ta in er