Chevrolet 1977 10 Series, Руководство по ремонту, Страница: 210 / 468

6C-16 OVERHAUL MANUAL
Fig. 6 C -4 4 -P o w e r P isto n and M e te rin g Rods
4. Remove lower choke lever from inside float bowl
cavity by inverting bowl.
5. Remove plastic tube seal from choke housing (Fig.
6C-50).
CAUTION:
Plastic tube seal should not be
immersed in carburetor cleaner.
6. To disassemble interm ediate choke shaft from choke
housing, remove coil lever retaining screw at end of shaft
inside the choke housing (Fig. 6C-49). Then remove
therm ostatic coil lever from flats on interm ediate choke shaft.
Fig. 6 C -4 6 --R e m o vin g A n e ro id C a vity In se rt
Remove interm ediate choke shaft from the choke housing by
sliding outw ard. The fast idle cam can now be removed from
the interm ediate choke shaft (Fig. 6C-50).
CAUTION:
Remove the cup seal from inside choke
housing shaft hole i f the housing is to be immersed
in carburetor cleaner. Also, remove the cup seal
from the float bowl plastic insert for bowl cleaning
purposes. DO N O T A TTE M P T TO REM OVE
P LA STIC INSERT.
RETAINING
P U M P D IS C H A R G E
Fig. 6C-45--Fioat Assem bly
Fig. 6C-47--Float B ow l Jets