Chevrolet 1977 10 Series, Руководство по ремонту, Страница: 292 / 468

(350)7A-8
OVERHAUL MANUAL
MA NU A L SHAFT TO
CASE RETAINER
RANGE SELECTOR
INNER LEVER
b n M M
f m m
M A N U A L SHAFT
PARKING PAWL
AC T U A T IN G ROD
Fig. 7A-2 1 B - R e m o v i n g M a n u a l S h a ft to Case Re ta in er Fig. 7 A - 2 3 B - R e m o v i n g M a n u a l S h a ft and Inner Lever and
Pa rk in g Pawl A c t u a t o r Rod from Case
8. Remove manual shaft to case retainer with
screwdriver (fig. 7A-21B).
9. Loosen nut holding range selector inner lever to
manual shaft (fig. 7A-22B).
10. Remove range selector inner lever from manual
shaft. Remove manual shaft from case. Remove inner lever
and parking pawl actuator rod from case. Disassembly inner
lever from parking pawl actuator rod (fig. 7A-23B).
11. Remove manual shaft to case lip seal (fig. 7A-24B).
RANGE SELECTOR INNER
LEVER TO M A N U A L SHAFT
NUT. TORQUE TO 30 LB.FT.
[SCREWDRIVER
M A N U A L SHAFT T O
CA SE LIP SEAL I
Fig. 7A -22B -Loosening N u t Holding Range Selector Inner
Lever to Manual Shaft
Fig. 7 A - 2 4 B - -R e m o v in g M a n u a l S h a ft to Case Lip Seal