Chevrolet 1977 10 Series, Руководство по ремонту, Страница: 239 / 468

AUTOMATIC TRANSMISSION (200)7A-3
SPRING
1 -2 ACCUMULATOR*
Fig. 7 A - 7 A ~ R e m o v in g 1-2 A c c u m u l a t o r S p r in g
Fig. 7A-1 O A - R e m o v in g G o v e rn o r Cover
L
Fig. 7 A- 8 A--R em o vin g 5th Ch e c k Ball
b. Using pliers, remove interm ediate servo cover and
discard seal rings; cover seal ring may be located in case
(Fig. 7A-12A).
c. Remove interm ediate servo piston and band apply
pin assembly (Fig. 7A-13A).
Fig. 7A-1 1 A - R e m o v i n g I n t e rm e d i a t e Servo R e ta in in g Ring
NOTE:
If interm ediate servo cover and seal assembly
can not be removed easily, place shop towels and hand
over cover and case. Apply air pressure into the direct
clutch accum ulator port (Figs. 7A-14A and 7A-15A).
5th CHECK BALL
(T.V. EXHAUST)
IN T E R M E D IA T E S E R V O
R E T A IN IN G R IN G
IN T E R M E D IA T E
S E R V O C O V E R
Fig. 7A-9A-Re moving Govenor Cover Retaining Ring
Fig. 7 A - 1 2A--Removing Servo Cover and Seal