Chevrolet 1977 10 Series, Руководство по ремонту, Страница: 262 / 468

(200)7A-26
OVERHAUL MANUAL
J-25010
DIREC T
CLUTCH
H O I--------
DIRECT
CLUTCH
PISTON
O M IT T E D
RIB
REL
G UIDE
D IREC T CLUTCH
PISTON
Fig. 7 A - 10 6 A - - ln s t a llin g D ir e c t Clu tc h Piston
CAUTION:
Retainer could locate in snap ring
groove and forcing retainer to compress springs,
could damage retainer plate when installing.
9. Using J-23327 tool, compress retainer and spring
assembly past the snap ring groove. Install the snap ring
(Fig. 7A-100A). An arbor press and J-23327-1 can be used
to compress the retainer and spring assembly.
10. Remove J-23327-1 a n d /o r J-6129.
11. Oil and install the direct clutch plates into the direct
clutch housing, starting with a flat steel and alternating
composition-faced and flat steel clutch plates. (See Figs. 7A-
109A and Fig. 7A-82A).
12. Install backing plate, chamfered side up.
13. Install snap ring (Fig. 7A-99A).
NOTE:
M ake sure composition clutch plates turn
freely.
14. Set direct clutch assembly aside.
Forward Clutch Housing Assembly (Fig. 7A-
110A)
I n s p e c tio n
1. Inspect teflon oil seals on turbine shaft for damage
and free fit in grooves. Do not remove unless replacing.
2. Remove and inspect forward clutch to direct clutch
thrust washer for damage (Fig. 7A-111A).
Fig. 7 A - 10 9 A - l n s t a l l i n g Clu tch Plates in to D ir e ct Clu tc h
H o u s in g
3. Place forward clutch down with turbine shaft
through hole in work bench.
4. Remove snap ring and inspect for damage (Fig. 7A-
112 A).
5. Remove backing plate from the forward clutch
housing.
Fig. 7 A - 10 8 A - - ln s t a llin g Release S p r in g Gu id e
EL
PLATES
DIRECT CLUTCH
HOUSING
Fig. 7 A - 107 A -P is to n Installing Tool