Reinstalling the Cover
893-743-A
I-11
Reinstalling the Cover
When you have installed the SIMM and set the jumpers, you must reinstall the
cover on the Model 281xSA hub. To reinstall the cover, follow these steps:
1.
Set the cover over the top of the hub, making sure the back edge of the
cover clears the expansion ports on the rear panel of the hub (see
Figure I-7).
Figure I-7. Reinstalling the cover
2.
Holding the sides of the cover, slide the cover toward the front of the
hub until the cover engages with the chassis edges.
2
EXPANSION 2
EXPANSION 3
EXPANSION 4
EXPANSION 5
2
1
1
3053.1