Service Port Boot Messages
893-743-A
H-3
BOOTP Image file name too long!
Maximum file length 128 chars, actual length [integer] chars.
You have entered an image filename that is too long. The Model 281xSA hub
allows only a 128-character name.
BOOTP timed out!
The Model 281xSA hub sent eight BootP requests at two-minute intervals and
received no reply. Either the BootP server is not functioning or the BootP
request packet from the Model 281xSA hub is not reaching the server.
Failed to load config file.
The configuration file was not found, it was the wrong configuration file, or the
server IP address was incorrect.
Failed to load image file.
The image file was not found, it was the wrong image file, or the server IP
address was incorrect.
Image load Err:Netload fmt start addr !=Image param block start addr!
Netload addr: [hexnum], Image Param block: [hexnum].
The image code was successfully downloaded, but the image is not valid. The
most likely cause is an invalid image file on the server.
Incorrect Image for platform
The image code was successfully downloaded, but the image is not valid. The
most likely cause is an invalid image file on the server.
Invalid IP address format.
You entered an improperly formatted IP address. A proper IP address consists
of four decimal integers, each between 0 and 255 inclusive, and separated by
periods. For example, 128.77.66.0 is a valid IP address.
Invalid Netload descriptor type: [integer].
The internal structure of the image file is not valid. The most likely cause is an
invalid image file on the server.