System Messages
H-8
893-743-A
■
trflife
■
max-nodes-per-port
When this error message contains the keyword threshold in place of xxxxx, the
message indicates that no entry will be created in the threshold table.
bad IP address xxxx
An incorrect IP address is specified as a parameter to one of the following
keywords:
■
netmask
■
primary-default-router
■
secondary-default-router
■
boot-router
baud-rate Unknown argument, xxxxx, ignored.
An unknown parameter is specified for the baud-rate keyword in the
configuration file. In this case, the system defaults to baud-rate 9600.
boot-protocol Unknown argument, xxxxx, ignored.
You have entered a parameter value other than those allowed for this keyword.
The system will use the default value for the specified keyword.
boot-mode Unknown argument, xxxxx, ignored.
You have entered a parameter value other than those allowed for this keyword.
The system will use the default value for the specified keyword.
Colon missing between network # and host # in IPX trap receiver
The IPX address is incorrectly formatted in the IPX trap receiver table. Make
sure you type a colon (:) between the network number and the node address.
config-load-mode Unknown argument, xxxxx, ignored.
An unknown parameter is specified for the config-load-mode keyword in the
configuration file. In this case the system defaults to remote-with-local-backup.