893-743-A
xv
Preface
Congratulations on your purchase of the SynOptics
®
Model 281xSA Ethernet
Hub. These standards-based 10BASE-T hubs provide networking solutions for
low- and medium-density 10BASE-T networks that use Simple Network
Management Protocol (SNMP) network management.
Purpose
This guide describes how to install and use the Model 281xSA Ethernet Hub,
including configuration rules for connecting Ethernet stations and making
network interconnections.
Configuration procedures for IP/IPX networks include instructions on how to
prepare the hub for configuration, an explanation of how to use configuration
menus, and descriptions of specific configuration menus and commands.
Before installing the Model 281xSA hub, read Chapter 3, “Network
Configurations and Cable Connections,” to plan the placement and connection
of hubs and Ethernet stations.
Throughout this guide,
System 2000
or
Model 28xx
hub
is used to refer to the
Model 2803, 2804, 2813SA, or 2814SA hub, and Model 281xSA hub refers
to either the Model 2813SA or the Model 2814SA Ethernet Hub. Where a
reference is specific to one of the models, the specific model number is used.
Audience
This guide is intended for network installers or administrators who are
responsible for configuring, installing, or maintaining an Ethernet network with
Model 281xSA hubs. These individuals should have the following background
and experience:
■
Working knowledge of SNMP networking
■
Familiarity with setting up Ethernet, 10BASE-T, IP, and IPX networks