Configuring the Model 281xSA Hub for IP/IPX Networks
4-28
893-743-A
The first six commands (i, s, o, p, b, and c) display menus with specific
commands for each set of parameters. The menus for these commands are
described in the next six sections. The other commands produce results without
shifting to other menus.
This menu includes the following commands:
i
[Set protocol parameters] Displays another menu that allows you
to set or modify the IP or IPX configuration parameters and set the
management protocol.
s
[Set SNMP parameters] Displays another menu that allows you
to set or modify the SNMP read community and read/write
community, to enable or disable the authentication traps, and to set
IP and IPX trap receivers.
o
[Set out-of-band parameters] Displays another menu that allows
you to set or modify the initialization string and baud rate.
p
[Set profile parameters] Displays another menu that allows you
to set or modify the location, name, and administrator contact
strings.
b
[Set boot parameters] Displays another menu that allows you to
set or modify the boot mode, boot protocol, and image load mode.
c
[Set security parameters] Displays another menu that allows you
to enable or disable security features and to toggle the security
configuration lock.
w
[Write values to EEPROM] Saves the current parameter values
(including any you have just changed) to the NVRAM. When the
Model 281xSA hub is restarted, it uses these values during
booting.
q
[Exit] Takes you out of the configuration process without saving
any changed values.