Configuration File Messages
893-743-A
H-9
hello-message Unknown argument, xxxx, ignored.
You have entered a parameter value other than on or off (the only valid
parameters) for this keyword. The system will use the default value (on)
for this keyword.
Illegal hello timer xxxx
The timer value contains non-numeric characters.
Illegal ping timer xxxx
The timer value contains non-numeric characters.
Illegal trap interval xxxxx.
The trap interval value is out of range.
Illegal trap receiver ageout time xxxx.
The ageout time contains one or more non-numeric characters.
image-load-mode Unknown argument, xxxxx, ignored.
An unknown parameter is specified for the image-load-mode keyword in the
configuration file. The system will use the default value for this parameter.
IPX trap table is full. Max of 10.
The IPX trap receiver table is full.
Local image does not exist. image-load-mode argument, xxxxx, ignored.
The image-load-mode keyword has been set to local-only or remote-with-local-
backup when the local image is not present locally. This failure might be due to
a flash EPROM failure. The system will use the default value for this
parameter.
management-protocol Unknown argument, xxxxx, ignored.
You have entered a parameter value other than those allowed for this keyword.
The system will use the default value for the specified keyword.
ping-message Unknown argument, xxxx, ignored.
You have entered a parameter value other than on or off (the only valid
parameters) for this keyword. The system will use the default value (on) for this
keyword.