Configuration Parameters
893-743-A
G-11
initialization-string string
The initialization string the Model 281xSA hub uses for out-of-band
communication (64 alphanumeric characters maximum). This is the string
of characters that a management station dials to establish an out-of-band
connection if there is an interruption in normal network communication. If
the configuration file contains no entry for this parameter, the default is
none.
location string
The Model 281xSA hub location (64 alphanumeric characters maximum).
This parameter can be any convenient identifier that describes where the
hub is physically situated. If the configuration file contains no entry for
this parameter, the default is none.
sysname string
The hub name (64 alphanumeric characters maximum). This parameter
can be any convenient identifier that gives the unique hub identification. If
the configuration file contains no entry for this parameter, the default is the
string “SYNOPT” followed by the last six digits of the hub MAC address.
syscontact string
The name and phone number of the administrator or contact person for the
hub (64 alphanumeric characters maximum). If the configuration file
contains no entry for this parameter, the default is the string “syscontact is
not set.”
read-community public
The community string used for read-only SNMP operations (20
alphanumeric characters maximum). If you do not specify a community
string, access to the read-only objects is disabled. If the configuration file
contains no entry for this parameter, the default is public.
write-community private
The community string used for read and write SNMP operations (20
alphanumeric characters maximum). If you do not specify a community
string, access to the read/write objects is disabled. If the configuration file
contains no entry for this parameter, the default is private.