Setting Run-time Parameters
893-743-A
4-43
Profile Parameters Menu
When you select the p command [Set profile parameters] from the run-time
parameters menu, the menu in Figure 4-25 is displayed.
Figure 4-25. Profile Parameters menu
This menu includes the following commands:
l
[Set location] Up to 64 alphanumeric characters that represent the
location of the Model 281xSA hub. This entry is useful for
determining the physical location of a hub.
n
[Set name] Specifies a name for the Model 281xSA hub.
c
[Set contact] Specifies the person who should be contacted about
matters pertaining to the Model 281xSA hub.
ESC
[Return to main menu] Returns the display to the main menu.
Profile Parameters Menu
4776
Location:
Name:
Administrator Contact:
Building A 4th floor wiring closet
Workgroup hub A
John Smith - Network Administrator, Ext 1234
-l
-n
-c
-ESC
Set location
Set name
Set contact
Return to main menu
Enter command: