893-743-A
ix
Figures
Figure 1-1.
Model 2813SA Ethernet Hub 1-1
Figure 1-2.
Model 2814SA Ethernet Hub 1-1
Figure 2-1.
Model 281xSA hub package contents 2-4
Figure 2-2.
Attaching feet 2-5
Figure 2-3.
Connecting the power cord 2-5
Figure 2-4.
Power LED 2-6
Figure 2-5.
Attaching brackets for rack installation 2-7
Figure 2-6.
Installing the hub in an equipment rack 2-8
Figure 2-7.
Connecting the power cord 2-9
Figure 2-8.
Power LED 2-9
Figure 2-9.
Attaching brackets for wall mounting 2-10
Figure 2-10.
Template for wall mounting 2-11
Figure 2-11.
Securing the Model 281xSA hub to the wall 2-12
Figure 2-12.
Connecting the power cord 2-12
Figure 2-13.
Power LED 2-13
Figure 3-1.
Typical single-hub configuration 3-3
Figure 3-2.
Connecting an AUI cable to a Model 508B 10BASE-T
Transceiver 3-4
Figure 3-3.
Connecting a Model 928 transceiver to a network
station 3-5
Figure 3-4.
Connecting UTP cable to a Model 508B transceiver 3-5
Figure 3-5.
Connecting the Model 928 transceiver to the wall 3-6
Figure 3-6.
Connecting a 10BASE-T interface card 3-7
Figure 3-7.
MDI-X/MDI switch set to the MDI-X position 3-8
Figure 3-8.
Connecting 25-pair UTP cable 3-9
Figure 3-9.
Model 281xSA hub 10BASE-T port connection 3-10
Figure 3-10.
Typical Model 2813/2803 cluster configuration 3-11
Figure 3-11.
Connecting a cluster configuration 3-13
Figure 3-12.
Interconnecting Model 2813SA hubs using an IEEE 802.3
10BASE-FL transceiver 3-15
Figure 3-13.
Interconnecting Model 281xSA hubs using coaxial
backbone 3-17
Figure 3-14.
Connecting Model 2814SA hubs using the 10BASE-FL
port 3-18
Figure 3-15.
Interconnecting hubs via the MDI port 3-19
Figure 3-16.
MDI-X/MDI switch set to MDI 3-20