Setting Up the Model 281xSA Hub Configuration File
G-2
893-743-A
The sample configuration file 281sa100.cfg looks like this:
# Specify file name for the NMM image file. NOTE this has to be the
# first un-commented line in this file for the NMM to load properly.
# For example:
#ensa100.img
#
# Assign local subnet mask for this NMM.
# Default for Class A NMM IP Address is 255.0.0.0.
# Default for Class B NMM IP Address is 255.255.0.0.
# Default for Class C NMM IP Address is 255.255.255.0.
# For example:
#netmask 255.255.255.0
#
# Specify the primary default router for this NMM.
#default-router xxx.xxx.xxx.xxx
# For example:
#default-router 0.0.0.0
#
# Specify the secondary default router for this NMM.
#secondary-default-router xxx.xxx.xxx.xxx
#
# Specify the router address for this NMM's TFTP request.
#boot-router xxx.xxx.xxx.xxx
#
# Enable or disable the automatic discovery of available default
# router(s). Valid entries are on and off. Default is on.
# For example:
#ping-router on
#
# Specify the time interval of pinging router(s) in seconds.
# Maximum number is 42,949,672 seconds. (approximate 497 days)
# Default / minimum time is:
#ping-time 60
#
# Specify the Novell network number for this NMM. Must be exactly
# eight hexadecimal digits.
#network-number 00000000
#
# Indicate baud rate used for the RS-232 out-of-band port. Valid
# entries are
# 300, 1200, 2400, 4800 and 9600 baud.
# Default is:
#baud-rate 9600
#