Configuring the Model 281xSA Hub for IP/IPX Networks
4-34
893-743-A
This menu includes the following commands:
x
[Set network number] Eight numeric characters, identifying the
IPX network number the Model 281xSA hub is attached to. This is
the network address the Model 281xSA hub uses during operation.
To set this address to [none], delete the entry.
ESC
[Return to Protocol Parameters Menu] Returns the display to
the Protocol Parameters menu.
SNMP Parameters Menu
When you select the s command [Set SNMP parameters] from the run-time
parameters menu, the menu shown in Figure 4-20 is displayed.
Figure 4-20. SNMP Parameters menu
SNMP Parameters Menu
4771
SNMP Read Community:
SNMP read/write community:
SNMP authentication traps:
public
public
ON (OFF)
-r
-w
-t
-i
-x
-ESC
Set read community
Set write community
Toggle authentication traps
Set IP trap receivers
Set IPX trap receivers
Return to main menu
Enter command: