Configuring the Model 281xSA Hub for IP/IPX Networks
4-4
893-743-A
1 stop bit
No handshaking
ASCII code
5.
Put the terminal (or emulator) online; do not leave it in configuration
mode.
The terminal screen is ready to display the messages sent from the
Model 281xSA service port, such as the results of the self-diagnostic tests
that run automatically after the hub is reset or the power is turned on.
To prepare the Model 281xSA hub for configuration or to view the service
port messages from the Model 281xSA hub, perform the next step.
6.
Reset the hub or cycle the power to the Model 281xSA hub.
Watch the output display (see the next section) as the hub completes its
self-test diagnostics.