Setting Run-time Parameters
893-743-A
4-35
This menu includes the following commands:
r
[Set read community] Up to 20 alphanumeric characters that
specify the SNMP community string used for read-only SNMP
operations. To set this value to [none], press [Enter] without typing
any other characters. This disables access to the read-only objects.
w
[Set read/write community] Up to 20 alphanumeric characters
that specify the SNMP community string used for read and write
SNMP operations. To set this value to [none], press [Enter] without
typing any other characters. This disables access to the read/write
SNMP operations.
t
[Toggle authentication traps] Switches the SNMP authentication
traps for IP and IPX between On and Off.
i
[Set IP trap receivers] Displays a menu (see the next section,
“SNMP Trap Receivers for IP”) that allows you to list up to 10 IP
addresses to send SNMP trap messages.
x
[Set IPX trap receivers] Displays a submenu (see “SNMP Trap
Receivers for IPX,” later in this chapter) that allows you to list up
to 10 IPX addresses to send SNMP trap messages.
ESC
[Return to main menu] Returns the display to the main menu.