Boot Configuration Menus
893-743-A
4-25
This menu includes the following commands:
i
[Set IP address] Use this command to identify the network IP
address of the Model 281xSA hub. The address can be up to 12
numeric characters, written in dotted-decimal notation. This is the
Internet address the hub uses during operation. To set this address
to [none], enter 0.0.0.0 or type [none]. See Appendix F, “IP
Addressing,” for a description of what each part of the address
means.
s
[Set Subnet mask] Use this command to identify the subnet mask
of the Model 281xSA hub. The subnet mask can be up to 12
numeric characters, written in dotted-decimal notation. This is the
Internet subnet mask the hub uses during operation. To set this
subnet mask to [none], enter 0.0.0.0 or type [none]. The default
mask is 255.255.255.0. See Appendix F, “IP Addressing,” for a
description of subnet masks.
g
[Set default gateway] Use this command to set the default
gateway address of the Model 281xSA hub. The default gateway
address can be up to 12 numeric characters, written in dotted-
decimal notation. This is the default gateway the hub uses during
operation. To set this default gateway to [none], enter 0.0.0.0 or
type [none].
n
[Get IP information from network] Use this command to
perform a BootP sequence without actually booting up the Model
281xSA hub.
[Esc]
[Return to Boot Main Menu] Returns the display to the Boot
main menu.
IPX Configuration Menu
When you select the x command [IPX configuration menu] from the Boot main
menu, the menu in Figure 4-14 is displayed.