Configuring the Model 281xSA Hub for IP/IPX Networks
4-36
893-743-A
SNMP Trap Receivers for IP
When you select the i command [Set IP trap receivers] from the SNMP
Parameters menu, the menu shown in Figure 4-21 is displayed.
Figure 4-21. SNMP IP Trap Receivers menu
This menu includes the following commands:
a
[Add a receiver] When you enter this command, the screen
displays the message:
Enter new trap receiver’s IP address:
Enter the address of the trap receiver you are adding. It can be
up to 12 numeric characters, written in dotted-decimal notation
(N.N.N.N, with N being a value from 0 to 255, inclusive).
When you press [Enter], the screen displays the message:
Enter new trap receiver’s community string:
IP SNMP Trap Receivers Menu
4772
IP trap receivers defined:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
[none]
[none]
[none]
[none]
[none]
[none]
[none]
[none]
[none]
[none]
-a
-d
ESC
Add a receiver
Delete a receiver
Return to SNMP Parameter Menu
Enter command: