Configuring the Model 281xSA Hub for IP/IPX Networks
4-26
893-743-A
Figure 4-14. IPX Configuration menu
For the new settings to take effect, they must be written to NVRAM (using the
w command [Write boot config to NVRAM] on the Boot main menu).
This menu includes the following commands:
g
[Get network number via network] Causes the Model 281xSA
hub to issue IPX “Find Nearest Server” SAP broadcasts to learn
the local network number.
s
[Set network number] Eight numeric characters, identifying the
IPX network number the Model 281xSA hub is attached to. This is
the network number the hub uses during operation. To set this
number to [none], enter 00000000.
[Esc]
[Return to Boot Main Menu] Returns the display to the Boot
main menu.
IPX Configuration Menu
281xSA Ethernet NMM
4765
Network Number:
Node Address:
xxx.xxx.xxx.xxx
00:00:81:xx:xx:xx
Enter command:
g
s
[Esc]
-Get Network Number via network
-Set Network Number
-Return to Boot Main Menu