Configuring the Model 281xSA Hub for IP/IPX Networks
4-10
893-743-A
5.
Press [Esc] to return to the 281xSA Boot main menu.
6.
Press f [Toggle config load mode] once to set the configuration load
mode to Local.
7.
Press m [Toggle boot mode] to set the boot mode to NVRAM.
8.
Press i [Toggle image load mode] to set the image load mode to Local.
9.
Press w [Write boot configuration to NVRAM] to save the booting
parameters to NVRAM.
10. Press e [Load and execute boot files] to restart the hub.
As the hub goes through the booting process, messages are displayed on
the screen, as shown in Figure 4-5 and Figure 4-6.
Figure 4-5. Boot messages (remote image file load)
4757
DCE#1 TFTP (NETASCII) to load the config file s281xsa.cfg
Config file loaded
DCE#1 TFTP (OCTET) to load the image file s281xsa.img
Image file loaded
Images in DRAM and FLASH are different. Begin writing image to FLASH
Erasing FLASH …… Erased FLASH …
Programming FLASH …
Saved image to FLASH
Copyright (c) 1994
SynOptics Communications, Inc.
All Rights Reserved
Date: Mar 14 1994, Time: 17:38:02
Model 281xSA Version 1.0.0
Press CTRL-Y to begin
* * * * * * * * * * * * * * * * * * * *
*
*
*
*
*
* * * * * * * * * * * * * * * * * * * *
*
*
*
*
*
*
*