x
893-743-A
Figure 3-17.
Network including a Model 3000 concentrator 3-21
Figure 3-18.
Fully manageable network composed entirely
of Model 281xSA clusters and single hubs 3-22
Figure 4-1.
Hardware address label 4-1
Figure 4-2.
Diagnostic messages for the Model 281xSA hub 4-5
Figure 4-3.
BootP service port screen display 4-6
Figure 4-4.
Boot main menu 4-9
Figure 4-5.
Boot messages (remote image file load) 4-10
Figure 4-6.
Boot messages (local image file load) 4-11
Figure 4-7.
Primary boot configuration menus 4-12
Figure 4-8.
Run-time parameters menus 4-13
Figure 4-9.
Sample configuration menu 4-14
Figure 4-10.
Boot main menu 4-15
Figure 4-11.
System Configuration menu 4-21
Figure 4-12.
Boot File Configuration menu 4-22
Figure 4-13.
IP Configuration menu 4-24
Figure 4-14.
IPX Configuration menu 4-26
Figure 4-15.
Menu for changing run-time parameters 4-27
Figure 4-16.
Protocol Parameters menu 4-29
Figure 4-17.
IP Parameters menu 4-31
Figure 4-18.
Changing the IP parameters 4-32
Figure 4-19.
IPX Parameters menu 4-33
Figure 4-20.
SNMP Parameters menu 4-34
Figure 4-21.
SNMP IP Trap Receivers menu 4-36
Figure 4-22.
SNMP IPX Trap Receivers menu 4-38
Figure 4-23.
Out-of-Band Parameters menu 4-40
Figure 4-24.
Set Security Parameters menu 4-42
Figure 4-25.
Profile Parameters menu 4-43
Figure 4-26.
Boot Parameters menu 4-44
Figure B-1.
Model 2813SA Ethernet Hub front panel B-1
Figure B-2.
Model 2814SA Ethernet Hub front panel B-1
Figure B-3.
Reset button B-4
Figure B-4.
Internal crossover function B-5
Figure B-5.
External crossover function B-5
Figure B-6.
MDI-X/MDI switch B-6
