83
4.7 Sensor Setting
The I/O device must be installed to use this function.
1. Click the drop-down list and select the sensor ID number.
2. Give a name to the sensor in
Name
column.
3. Click
External IO
to configure external I/O device if it is available(see also
4. The system automatically detects the sensor and input relates information. User can enter a short
description for this relay in
Description
frame.
5. In the test section, click
Test
to check the sensor status.
Red
is high and
Green
is low.
6. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.
Содержание IWH3216 Touch
