41
Disk Management
When DVR system detects a new hard disk, user can format and partition the hard disk in here. Also, user
can re-partition the hard disk but the all files that recorded on the hard disk will be deleted.
To format and partition the hard disk:
1. User should see the installed hard disk is listed. Click on the hard disk that wants to format or partition.
2. Click
+
button to add the selected hard disk into
Partition Table
section.
3. User can adjust the capacity of partition by clicking
Capacity
column and enter the capacity. If user
doesn’t want to divide hard disk into several partitions, and then, just leave the capacity without
change.
4. The partition can be named by clicking on
Label
column and enter the name.
5. To create more than one partition, do the steps 2 and 4 again.
6. When all the partition has been added, click
Start
to format all partitions.
7. When the formatting complete, the each partition status will change to
OK
.
8. Click
OK
to exit when formatting is completed.
Содержание IWH3216 Touch
