51
-
Include:
set a rule for a lime with a string or character to be displayed.
-
Exclude:
set a rule for a line with a string or character to be concealed.
-
Bill End:
set a rule to divide each transaction.
4. Select
Type
– Ascii or XML
5. Enter the string or character as the rule in
Data
column. The maximum length is 31 characters.
6. Click
OK
7. Click
Save
. The configuration will be lost without saving.
8. To modify existing replace rules, double click it.
Character Replacement
Set a rule to replace a character or word in POS data. The maximum replacement is 8.
1. Select a POS device from device list
2. Click
Add
in Replace section
3.
Old Data:
select the
Type
(Ascii or Hex) and enter word or character that wants to be replaced
4.
New Data:
select the
Type
(Ascii or Hex) and enter the word or character that will replace it in Old Data.
5. Click
OK
6. Click
Save
. The configuration will be lost without saving.
7. To modify existing replace rules, double click it.
Adjust Rule Priority
User can set the priority of rule groups. Select the group and click up/down arrow button to move the priority
level. The upper position, the priority is higher.
Содержание IWH3216 Touch
